SLC Free 2
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
SLC Free 2 Mods
Mod #1: Split Grounds Normally the ground for the electronics and sensor heater is shared, this reduces the accuracy of the linear output due to ground offset caused by the sensor heater current. The sensor heater consu… |
|
16 | 2972 | June 23, 2025 |
|
Bar display preferred
|
|
0 | 27 | May 19, 2025 |
|
SLC Free temp reading potential error
|
|
9 | 86 | May 11, 2025 |
|
Getting the SLC Free 2 project back on github
|
|
0 | 38 | April 3, 2025 |
|
SLC input voltage
|
|
2 | 51 | March 20, 2025 |
|
SLC Free 2 Display
|
|
0 | 44 | February 9, 2025 |
|
SLC Free 2 linear output voltage calibration for AEM
|
|
1 | 102 | January 21, 2025 |
|
SLC Free 2 without LCD
|
|
2 | 94 | January 12, 2025 |
|
Weatherproof housing for SLC Free 2
|
|
1 | 109 | October 27, 2024 |
|
SLC Free 2 flip display
|
|
2 | 103 | October 25, 2024 |
|
SLC 2 display to AFR
|
|
2 | 184 | July 8, 2024 |
|
Slc free 2 not working well
|
|
1 | 161 | July 1, 2024 |
|
Does SLC Free 2 require free to air calibration?
|
|
1 | 201 | May 31, 2024 |
|
DIY SLC Free 2 - indications
|
|
1 | 215 | April 4, 2024 |
|
SLC Free 2 - 0.68 on Free Air
|
|
8 | 273 | February 6, 2024 |
|
SLC Free 2 Always 1.36
|
|
4 | 294 | January 27, 2024 |
|
Are products based on SLC Free required to release sources?
|
|
1 | 249 | January 22, 2024 |
|
DIY SLC Free 2 - Output is erratic
|
|
5 | 402 | December 30, 2023 |
|
SLC Free 2 Accuracy
|
|
5 | 404 | November 3, 2023 |
|
What is the influence of E5, E10 fuel on lambda value?
|
|
6 | 295 | April 25, 2023 |
|
SLC Free - V2.01
|
|
2 | 338 | October 17, 2022 |
|
My SLC2 Free 2 always measures a lean mixture
|
|
2 | 437 | October 10, 2022 |
|
Inaccurate Reading / Troubleshooting advice
|
|
3 | 410 | September 18, 2022 |
|
SLC2 FREE 2 not booting
|
|
5 | 376 | August 29, 2022 |
|
About the SLC Free 2 category
|
|
1 | 468 | November 25, 2021 |